|
|
| Body | | Toyota MR2 MK1 N/A - wheel arches | | Has anyboby out there or no of any firm that makes replacement alloy or fibreglass wheel arches or any body parts for the mk1 mr2 1985 model, |
| Fix / Recommendation 16 submitted by DAVE ANDERSON MONMOUTH - ww.and-co@tiscali.co.uk on 02/11/2004 | I have several MKIs that I use parts of on my projects and I have lots of extra fenders ,doors,hoods,and I also have two cars with good rear quarters .... More |
| Fix / Recommendation 17 submitted by DAVE ANDERSON MONMOUTH - ww.and-co@tiscali.co.uk on 02/11/2004 | | www.mr2-solutions.co.uk sell fibreglass over arch kits.... More |
| Body | | Toyota MR2 MK1 N/A - How to fit | | I have purchased some original t-bar roof bars in aluminium from a lady, does anyone know outhere how the rear bar afixes to the rear of the car to extend it i assume some kind of toyota bracket should mount it and attach to the drop sides over the engine bay(there are three screws either side)!!!
does anyone know have a similar roof bar by toyota |
| Body | | Toyota MR2 MK1 N/A - ROOFBARS - YES THEY DO EXIST!!!! | | Let me explain it better - help!!!
I keen on surfing and located and purchased off internet at set of roofbars (aluminium with mr2 written on side(original toyota) with felt moulding.
the front bar mounts under the the t-bar metal but the rear bar must mount with some kind off bracket (not supplied or lost) where the toyota clear spolier is fixed by large screws around the rear window, I need to know if anyone else has this bracket or owns a roof bar kit and can HELP!!!! |
| Fix / Recommendation 12 submitted by DAINEL VINES - mr.vines@ntlworld.com on 25/05/2004 | | I had one supplied with my AW11 from new and used to carry our Xmas tree home on it! It fits on the rear section with a triangular bracket and extende.... More |
| Body | | Toyota MR2 MK1 N/A - lock on right door | | i cant lock the door on the passenger side whit the key. but i can do it from the inside. |
| Body | | Toyota MR2 MK1 N/A - Body Problems | | Here a club member based in Cambridge with a serious body problem on a 1988 white T Bar.
1) Beteween the Tbar roof and the windscreen, the fine body part is so rusted that there is a hole. I use regularly a little garage in Kettering which is quite good for special works without big brand prices. But they are very afraid of changing this metal bar as they might broke the glass. I don't know how to find the part neither how to have it change it safely.
2) The rear panel of the rear boot has an enormous rust hole by which water find its way too. I speak of the body part just above the plate, in which there is the lock for the boot. I assume it has to be changed but then again, don't know how to find the part.
Any idea ? Thank you,
flohewitt@ntlworld.com |
| Fix / Recommendation 1 submitted by florence hewitt - flohewitt@ntlworld.com on 24/11/2009 | | First call i would try would be Fensport, they're good for advice and parts.... More |
| Body | | Toyota MR2 MK1 N/A - rust on roof | | I have a Mk1 MR2 1985 with rust around top of screen is it possible to get a new roof skin? |
| Body | | Toyota MR2 MK1 N/A - REAR BUMPER for 85 MR2 | | I'm looking for a good condition rear bumper for 85 MR2? Anyone selling? |
| Body | | Toyota MR2 MK1 N/A - Bent front pannel. | | Had an argument with a fence it won!!!. Concerquently i'm in need of a new front pannel, were do I find such a thing? |
| Body | | Toyota MR2 MK1 N/A - rusty wheel arches | | guess what my wheel arches have gave up the ghoust after a year turns out they where fannyed up oh well any one help out with a set please limited funds as just done the clutch many thanks |
| Fix / Recommendation 16 submitted by keith pitt - www.keith.pitt1@hotmail.co.uk on 10/05/2007 | | Try out site out for replacement panels
www.tandk-mr2-mk1-spares.piczo.com
hope this helps, cheers, Tony.... More |
| Body | | Toyota MR2 MK1 N/A - Front body panels and hood | | i have an 85 mr2 that im looking at buying for cheap but i need to find body panels and a hood because it hit a deer. im getting a great deal on the car but i need the panels... does anyone know where i could find any? |
| Body | | Toyota MR2 MK1 N/A - Replacement Panel | | Driver side rust behind the back arch any recommendations on replacements ? also front panel under skirt is rusted in the corner any details on replacements or repairs ? |
| Body | | Toyota MR2 MK1 N/A - Replacing lighting pods and lenses? | | I've been looking everywhere for a How to..? My lighting pods have corroded,I have one light going to the shop and the other returning with the change! I need to replace them obviously,I'm looking for a bit of advice on approaching the task. I've looked all over and can't seem to find any relevant faq. |
| Body | | Toyota MR2 MK1 N/A - Front spoiler/bumper | | Not much of a problem more a query I've just bought a 1989 AW11 Coupe can I get a front bumper/spoiler which incorperates fog light fittings as I would like to replace the one on the vehicle which I think is just a standard design. |
| Fix / Recommendation 2 submitted by Morgan - morgan.thomas1@blueyonder.co.uk on 06/04/2002 | | Would like to replace Toyota MR2 MK1 front spoiler/
bumper.Could you please tell me where I could find one..... More |
| Body | | Toyota MR2 MK1 N/A - Rusty four corners | | I need replacement front wings and repair panels for the rear arches and overhang can anyone help?? |
| Fix / Recommendation 1 submitted by Adam callaghan - adam.callaghan@cibasc.com on 23/03/2004 | | look on www.mr2mk1club.com they have a section advertising people selling rear arch repair sections. I have used them all and recommend jdg panels mai.... More |
| Body | | Toyota MR2 MK1 N/A - Pinstripe decal to front/rear wings, | | I have just had some body work carried out on my 89 MR2 and require the pinstripe decals to the front and rear wings, they are only about 6-8 inches long in dark blue. I have been advised by Toyota that this item is no longer available. Can someone please help |
| Fix / Recommendation 1 submitted by David Lovatt - fdlovatt@btconnect.com on 01/04/2007 | | Yes, I can help. I have recently made these kits for RED and White Mk1b's. I will be making the kit for MICA BLUE and SKY? BLUE cars in the new year.... More |
| Body | | Toyota MR2 MK1 N/A - wing mirrors dont retract | | i have just bought a mr2 g-limited and i have found that the wing mirrors dont retract on it can anybody help |
| Fix / Recommendation 12 submitted by paul - rhondda69@aol.com on 25/08/2004 | | the 30 amp fuse under steerig column may be rain leaking onto your switches but this is the fuse to change far easier !.... More |
| Fix / Recommendation 13 submitted by paul - rhondda69@aol.com on 25/08/2004 | | Hi, I had a similar problem. It was caused by the T-bar leaking in the rain onto the drivers door switch, I fixed it by buying a replacement switch un.... More |
| Body | | Toyota MR2 MK1 N/A - T-TOPS LEAK | | MY T-TOPS LEAK BY DOOR HOW DO I FIX IT AND WHERE CAN I GET THE PART SOON |
| Fix / Recommendation 1 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | where can i get new rubbers for my mk2 T-bar roof.... More |
| Fix / Recommendation 2 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | You dont need a part and you dont need to smear the seals with vaseline or silicone seals. Unscrew (phillips screws) the cover plates over the shoot b.... More |
| Fix / Recommendation 3 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | Our t bar roof leaked on our mk1. The solution was to purchase some rubber silicone spray from Halfords and apply it to all the rubber seals for the d.... More |
| Fix / Recommendation 4 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | halfords silicon rubber spay, first class, let it soak in for a couple of hours..... More |
| Fix / Recommendation 5 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | how can i stop my roof from leaking.please i need help..... More |
| Fix / Recommendation 6 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | I used "make a gasket" compound. This creates a seal between two pieces. Dries in about one hour. Creates flexible and tight seal.
Joe.... More |
| Fix / Recommendation 7 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | I too had the same problem. I put foam addhesive strips under the original seals to push them up then took the panels off my door and raised the stopp.... More |
| Fix / Recommendation 8 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | i have replaced the seals on my t-top which cost £800 but it is still leaking.according to my mechanic i have to get new roofs.any advice..... More |
| Fix / Recommendation 9 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | I used black GE silicon and filled in the area where it leaked from and placed saran wrap at that area and placed the t-tops back in place, yes it do.... More |
| Fix / Recommendation 10 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | DONT use vaseline, it is petroleum based and will "eat" the seal (not quickly, but it will) use a silicone grease, plumbing centres sell it, but its w.... More |
| Fix / Recommendation 11 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | If rubbers are all intact, just smear with Vaseline, rub in & wipe off. It worked for me!.... More |
| Fix / Recommendation 12 submitted by PETER SALAS - ZX2RICE@MSN.COM on 15/07/2003 | | Hi there, I have a T-bar and the drivers side leaked like a pig around the door area. Having looked into it there are a number of fixes. The one I tr.... More |
| Body | | Toyota MR2 MK1 N/A - rusty sills | | I need some replacement sills ...mine are completly corroded could somebody point me in the right direection , many thanks |
| Fix / Recommendation 11 submitted by keith chapman - kc030458@tiscali.co.uk on 10/09/2007 | | Hi, yes we sell replacement sills for the MK1, our details are here
www.tandk-mr2-mk1-spares.piczo.com
hope this helps, cheers, Tony.... More |
| Body | | Toyota MR2 MK1 N/A - Front Wings | | Hi I need the front wings for a 1989 MR2 MK1 in mint conditoin i'm happy to buy new if need be but not happy paying the price Toyota want
Thanks
J.J. |
| Body | | Toyota MR2 MK1 N/A - RUST | | WHAT IS THE BEST WAY TO GET RID OF RUST ON THE REAR QUARTER PANELS WITH OUT HANGING NEW QUARTERS |
| Fix / Recommendation 1 submitted by PETER SALAS - ZX2RICE@MSN.COM on 01/08/2003 | | Cutting and welding a new bit of metal. Youll get a lot better finish with a new panel though..... More |
| Body | | Toyota MR2 MK1 N/A - Rusty Roof | | I have bad rust on the inside of the roof along the join of the windscreen .Apart from a small area bubbling it looks ok on the outside. Is this due to the guttering as there appears to be nowhere for water to run to?
Is it repairable before it gets worse ? |
| Fix / Recommendation 12 submitted by Steve Clarke - steveclarke543@operamail.com on 24/09/2007 | | Yes its fully repairable, youll need to take to paint back to bare metal, & respray the front section, this is very common on t-bars, maje sure you tr.... More |
| Body | | Toyota MR2 MK1 N/A - mr2 mk1 body panels | | i'm looking for mint condition body panels for my 1989 mr2 mk1. the wheel arches are badly rusted and need to be replaced. can anybody please help me? |
| Fix / Recommendation 1 submitted by vicky melling - vickiymr2@aol.com on 08/01/2004 | | I HAVE A SET OF WHEEL ARCH REPLACEMENTS WHICH I NO LONGER NEED AS THE CAR IS GOING FOR SCRAP AFTER THE FRONT END GOT HIT.
THE PRICE IS £50 PLUS PO.... More |
| Body | | Toyota MR2 MK1 N/A - rusty cills | | My brothers car has just failed it's MOT on the N/S and O/S outer cills being rusty, and the rust being within 30mm from the suspension mounts. As I may try to fix it for him, does anyone know whether I can get the parts, and how I would go about the repair. Any replies would be very gratefully received. |
| Fix / Recommendation 1 submitted by steve sampayo - stephen.sampayo@ntlworld.com on 01/06/2005 | | Try our site for MK1 repair panels
www.tandk-mr2-mk1-spares.piczo.com
cheers, Tony.... More |
| Fix / Recommendation 2 submitted by steve sampayo - stephen.sampayo@ntlworld.com on 01/06/2005 | | If its just rusty sills, just cut the old stuff out and weld some new bits on. You should be able to source parts from fensport or a breakers or you c.... More |
| Body | | Toyota MR2 MK2 N/A - Rattling Door Mirrors | | Hi. Does anyone know how I can stop my door mirrors from rattling whenever I do over 50mph? They're not falling off, they retract and open back out just fine...but I don't always want to have my music blasting like boy racer every time I get fed up of listenening to them. I have a Mk2 G-Limited. Any help would be very much appreciated. Thanks. Rob |
| Fix / Recommendation 1 submitted by Rob Hamilton - surfing@tiscali.co.uk on 30/10/2004 | | I had this problem too but the screws under the mirror are quite rusty so I didnt want to force them but if you retract them and try rocking them back.... More |
| Fix / Recommendation 2 submitted by Rob Hamilton - surfing@tiscali.co.uk on 30/10/2004 | | Just tighten the screw (philips) under the mirror casing.... More |
| Body | | Toyota MR2 MK2 N/A - Boot Lock Jammed | | Help! my boot lock is jammed and i can't unlock it. does anyone know i can replace the lock?? |
| Fix / Recommendation 1 submitted by Darren - nospam@nospam.com on 08/06/2005 | | same thing happened to me.open engine bay.cut a bit of the rubber seal on luggae compartment near the luggage hinge(not to much as to allow in water o.... More |
| Fix / Recommendation 2 submitted by Darren - nospam@nospam.com on 08/06/2005 | | WD40 worked for me (good job as the weeks shopping was inside!). WD40 was my girlfiends idea so I tried other things first before putting the key in a.... More |
| Fix / Recommendation 3 submitted by Darren - nospam@nospam.com on 08/06/2005 | | spray WD40 into key hole - work in with key - will soak into lever action - bingo!.... More |
| Body | | Toyota MR2 MK2 N/A - locked out!!! | | i have a toyota MR2 G-Limited 1990 and i reacently attempted to install a boot lock and only put one screw in and the boot slamed shut and i did not have time to put either of the catches on the lock meconism, now i am totally locked out, so does anyone know any other way to get in the boot or getting at the catch in the boot with out having to make a whole??? now i have drilled the lock out in order to try and hook onto the rod inside the boot useing a peice ov wire. i also need a few parts for my MR2 G-Limited 1990 i need a electric arial,passenger side front repeater (that goes on the wing), a genuine cd player please email me if anyone has any info for me :) |
| Body | | Toyota MR2 MK2 N/A - Side repeater fitting dimentions??? | | Hi! I'm trying to fit some original side repeaters to my imported 94 g-limmited. It was given stupid universal stick-on ones before and looks naff. Could some kind person please send me some dimentions on how big the hole in the wing should be and what shape. Many thanks, James (jamesfaulks@blueyonder.co.uk). |
| Body | | Toyota MR2 MK2 N/A - riveted sills | | is it legal ? will it get through the mot? if the sills sre riveted on |
| Body | | Toyota MR2 MK2 N/A - Broken indicator lense | | Rear near side indicator lense broken by mr nobody! |
| Body | | Toyota MR2 MK2 N/A - Paint Oxidizing | | Hi there, I have a 1992 MR2 and live by the coast. I have found that the paint is oxidising on the roof. How do I fix it. Is it a case of having to get a new paint job, or can I just fix the problem. I have limited funds at the moment as I am doing up my house, so a fix it idea would be helpful at the present. Any advice would be appreciated.
Many thanks
Kay |
| Fix / Recommendation 1 submitted by Kay - smokey1 on 16/11/2006 | | Itll be the clear coat laquer coming away? If so it requires a repaint to be fixed properly. You can get a quick fix by using a can of clear lacquer r.... More |
| Body | | Toyota MR2 MK2 N/A - Sunroof | | How do you remove the sunroof off a MK2? |
| Fix / Recommendation 1 submitted by james - jaymzmatthews82@hotmail.com on 06/12/2008 | | The same latch you use to open the sunroof is the one youll use to take it off. You simply press the sides of the latch inwards and it releases off i.... More |
| Fix / Recommendation 2 submitted by james - jaymzmatthews82@hotmail.com on 06/12/2008 | | where do the sunroof go when you take it off and do u know where i can get the covers plz karen.... More |
| Body | | Toyota MR2 MK2 N/A - Split window seals | | Both window seals have split & a noisy draught starts as you pick up speed. The seals are at the very front of the door, triangular shaped.
Toyota said that it was expensive to replace, has anyone got a quick-fix answer ??? |
| Fix / Recommendation 1 submitted by Graham - graham@southafrican.freeserve.co.uk on 05/12/2003 | | To verify the problem, whilst driving along with the noise coming from the speaker, put your hand over the small tweeter cover behind the wing mirror .... More |
| Body | | Toyota MR2 MK2 N/A - Air intake panel | | Does anyone know how to remove the air intake panels on a Mk2 1995 uk spec. I got a couple of small dents in my rear quarter panel and I cant get to them unless I remove these panels.
Cheers
Paul |
| Body | | Toyota MR2 MK2 N/A - interior | | does the interior out of a 1996 mr2 fit in a 1990 |
| Fix / Recommendation 1 submitted by jj reece - jakereece@aol.com on 04/02/2003 | | yes but the only bug is if your car is a t bar the door caps do not fit , and the switchs for the winders and retracticel mirrors any problems with i.... More |
| Body | | Toyota MR2 MK2 N/A - MR2 MK 2 Drives side toms style air scoop | | I have both the passenger side and drivers side air scoops for sale.
price is £120 ono per side |
| Fix / Recommendation 1 submitted by lee adams - lee_adams@ntlworld.com on 28/04/2004 | | HAVE YOU SOLD THE RIGHT SIDE SCOOP YET?.... More |
| Fix / Recommendation 2 submitted by lee adams - lee_adams@ntlworld.com on 28/04/2004 | | im interested let me have the price for the 2 markfla1@aol.com
.... More |
| Fix / Recommendation 3 submitted by lee adams - lee_adams@ntlworld.com on 28/04/2004 | | well whats the crack would be interested in the air scoops,both sides.just one question,are they tom style air scoops.there actualy for my mates 95 tu.... More |
| Body | | Toyota MR2 MK2 N/A - Cannot open engine compartment | | The engine compartment opening lever doesnt unlock the engine compartment, the cable seems to be ok (ie not broken). help! |
| Fix / Recommendation 1 submitted by Dave - dave_white109@hotmail.com on 11/08/2003 | | Just had the same problem with mine....remove the catch assembley from the engine compartment (3 nuts) and take a look inside. You will probably see a.... More |
| Fix / Recommendation 2 submitted by Dave - dave_white109@hotmail.com on 11/08/2003 | | hi a not so drastic approch is lift the carpets and follow the outer cable untill you can go no more and then grip the cable and pull!! this should re.... More |
| Fix / Recommendation 3 submitted by Dave - dave_white109@hotmail.com on 11/08/2003 | | cut the cable and use pliers to pull the cable inside the jacket. Go buy a new one at toyota after..... More |
| Body | | Toyota MR2 MK2 Turbo - leaking T-bar roof | | I'm getting a wet shoulder every time it rains !
Once the rain starts to drip in it just gets worse until the right bolster and my arm gets soaked !!!
I can see exactly where it's coming from because there's a V shaped gap where the two rubber seals meet.
Can anyone recommend any solution to this wet problem ? |
| Fix / Recommendation 1 submitted by Simon - sydriscoll@hotmail.com on 12/01/2005 | | HI I had the same prob with mine, toyota checked and refitted all the rubbers and it still leaked, after I looked very carefully at the height the ele.... More |
| Fix / Recommendation 2 submitted by Simon - sydriscoll@hotmail.com on 12/01/2005 | | A little trick I picked up on another site for fixing the problem.
Get yourself a tube of silicon and some clear wrap (the stuff you wrap kids lunc.... More |
| Fix / Recommendation 3 submitted by Simon - sydriscoll@hotmail.com on 12/01/2005 | | i also have the same problem i was told to vasaline the joints in the winter
.... More |
| Fix / Recommendation 4 submitted by Simon - sydriscoll@hotmail.com on 12/01/2005 | | i also have the same problem i was told to vasaline the joints in the winter
.... More |
| Fix / Recommendation 5 submitted by Simon - sydriscoll@hotmail.com on 12/01/2005 | | hi
ive got the same prob n just wana know have you sorted yours? if so can you provide me with a contact number please??.... More |
| Body | | Toyota MR2 MK2 Turbo - Air Scoop | | Does anybody know where i can get the air scoop that curves onto the roof from and what it is called |
| Fix / Recommendation 1 submitted by Martyn thompson - martyn@martcaz.co.uk on 18/06/2003 | | oVP8n1 yutfqyxcxjme, [url=http://npflloiykqtz.com/]npflloiykqtz[/url], [link=http://zuhadaafurbn.com/]zuhadaaf.... More |
| Fix / Recommendation 2 submitted by Martyn thompson - martyn@martcaz.co.uk on 18/06/2003 | | I will have some air scoops ready for sale for £120 no vat, after the 26th of April .
The cost of shipping will depend on where you live but I would.... More |
| Fix / Recommendation 3 submitted by Martyn thompson - martyn@martcaz.co.uk on 18/06/2003 | | I should have some coming in to the UK in the next few weeks if you are interested, they are called toms air scoop.
Let me know if you are interest.... More |
| Fix / Recommendation 4 submitted by Martyn thompson - martyn@martcaz.co.uk on 18/06/2003 | | TOMS AIR SCOOP. LOOK ON EBAY, THEYRE EVERYWHERE!.... More |
| Body | | Toyota MR2 MK2 Turbo - Rear Bumper construction | | I wan't to fit a reversing alarm to my Mk2 Turbo, this requires two 25mm holes in the rear bumper to fit a 400mm cylindrical sonic sensor. Before I commit myself to making holes in the bumper does anybody know if the hidden internal construction will allow this? |
| Body | | Toyota MR2 MK2 Turbo - metal on metal niose at front end | | When going over bumps in the road i get this strange rattle from the front of the car it sounds like metal on metal tapping each other a number of times the problem seems to be less the faster i go, eveything under the bonnet is surcure, anyone have any surgestions cause it's realy driving me mad
thanx .... james (uk) |
| Fix / Recommendation 1 submitted by James Bradshaw - jimmajamma2002@aol.com on 28/07/2003 | | usually loose or worn suspension anti-roll bar droplinks, or freeplay in Bilstein struts..... More |
| Fix / Recommendation 2 submitted by James Bradshaw - jimmajamma2002@aol.com on 28/07/2003 | | Hi James,
I have just had the same problem.
Toyota wanted £80 + vat each for the linkf.
I have found a site that sells them for £35 + vat eac.... More |
| Fix / Recommendation 3 submitted by James Bradshaw - jimmajamma2002@aol.com on 28/07/2003 | | Hello :) Sooo common...Prob drop links so change these first and see if problem persists. Expensive from Mr.T. but this guy creates better than toyota.... More |
| Fix / Recommendation 4 submitted by James Bradshaw - jimmajamma2002@aol.com on 28/07/2003 | | Hello :) Sooo common...Prob drop links so change these first and see if problem persists. Expensive from Mr.T. but this guy creates better than toyota.... More |
| Fix / Recommendation 5 submitted by James Bradshaw - jimmajamma2002@aol.com on 28/07/2003 | | Twp possible causes
1) Most likely this noise is caused by worn anti-roll bar drop links. These are the small links with a ball joint at either en.... More |
| Body | | Toyota MR2 MK3 - brakes quality and manufacturer | | New Mr2 Bought dec 2002...FIRST SEVICE DEC 2003.BRAKES DISC SKIMMED , ONLY 5000 MILES. OCT2004 GRINDING NOISE VEHICLE TAKEN TO DEALERS.. THEY ARE CHANGING DISC AND THE PADS WHICH HAD WORN TO METAL... IS THERE A PROBLEM THE CONSUMERS SHOULD KNOW ABOUT HERE ????? a very disatisfied customer |
| Fix / Recommendation 16 submitted by bob cox - bob@chadmar.fsnet.co.uk on 25/09/2004 | | I own a 2003 revised Mk3. At 27,000 miles my brakes were making the same grinding noise. Toyota replaced the front discs and pads and showed me the .... More |
| Body | | Toyota MR2 Other - Need to find | | Need to find a Rear Wheel Arch, drivers side, Rear Wheel Arch Repair Panel for Toyota MR 2, Mark One, 1989. Can anyone help? |
| Body | | Toyota MR2 Other - how do i take front wing off? | | some idiot hit my n/s wing and smashed it, i need to fit a new one, can anyone let me know exactly how to take off the front wing.
G limited. |
| Body | | Toyota MR2 Other - fitting an mr2 convertible roof myself | | hi i need some help, does anyone know if there is an instruction manual out there to help me. im getting it shipped over from America and they dont provide manuals!please help, thanks ! |
| Body | | Toyota MR2 Other - Air Ducts(Scoopes) | | Hi my son owns a 2001 mr2 roadster and has a leak thanks to yours selves you have given us a possible solution, but how do you remove the air ducts(scoops) in front of the rear wheels any help most welcome.
cheers Ian |
| Fix / Recommendation 1 submitted by Ian Collins - Ian_Collins_864@Hotmail.com on 27/11/2006 | | I just did that. I pulled them out, not the right way Im sure as at the front there are nylon studs that can be removed from the inside. At the back.... More |
| Body | | Toyota MR2 Other - I cant get in!! | | i have a toyota MR2 G-Limited 1990 and i reacently attempted to install a boot lock and only put one screw in and the boot slamed shut and i did not have time to put either of the catches on the lock meconism, now i am totally locked out, so does anyone know any other way to get in the boot or getting at the catch in the boot with out having to make a whole???
i also need a few parts for my MR2 G-Limited 1990
i need a electric arial,passenger side front repeater (that goes on the wing), a genuine cd player
please email me if anyone has any info for me :) |
| Fix / Recommendation 1 submitted by david - dave-t-e-f@hotmail.co.uk on 08/11/2007 | | does any one know how to open the boot without the use of a crowbar, lock stopped working, drilled it out, still nothing, toyota breakers in derby sai.... More |
|
|
|